OTC 7507 CV Joint Fork Removing Adapter

Designed to be used with OTC slide hammer number 1155. The otc 7507 is designed to be used with OTC slide hammer number 1155. It can also be used in conjunction with OTC extension number 7508 or both. It can also be used in conjunction with OTC extension number 7508 or both.

OTC 7508 17-1/2" Slide Hammer Extension

Joint. This tool pulls c. V. It will also pull other joints having hidden retaining rings. Joints on 1986-current Taurus/Sable. 17-1/2 inch long slide hammer extension. The otc 7508, pry bars can damage expensive aluminum transmission cases, and attempting to do the job by pulling on the axis can damage the roller bearing inside the C.

V. With this puller, thanks to the straight, the axle assembly is popped out of the trans-axle without damage, even pull provided by the slide hammer. Weight 2 pounds 7 ounces.


Similar products

OTC (7507) CV Joint Fork Removing Adapter
OTC (7509) Inner CV Joint Puller
OEMTOOLS 27058 Front Wheel Drive Axle Pulley Attachment
OTC (7703) 10 Lb. Slide Hammer Puller
OTC 4579 9-Way Slide Hammer Puller Set
Steck 71415 Axle Popper II
Lisle 64970 Parasitic Drain Tester  
OTC (7661) Caliper Hanger Set
OTC (7494A) Rear Axle Bearing Service Set
-Stainless Steel- Brake Caliper Hanger Hook (2 Piece Set) -MADE IN THE USA-


OTC 4579 9-Way Slide Hammer Puller Set

Two and three way cross blocks and cone provide the perfect jaw configuration for most jobs. Pulls flange-type rear axles and most front-wheel drive hubs. 17-1/2 inch long slide hammer extension. The set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements as well as a blow-molded case.

. Internal and external jaws provide a variety of combinations to pull bearings gears and seals. The set is designed for use with other OTC 5/8 inch-18 thread slide hammer attachments. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs. Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.

It will also pull other joints having hidden retaining rings. Weight 2 pounds 7 ounces. Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments. The otc 9-way slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals.

Joints on 1986-current Taurus/Sable. This tool pulls c. V.


Similar products

OTC 4507 Bearing Race and Seal Driver Set - 10 Piece
OTC 6295 Front End Service Set
GearWrench 41710 Rear Axle Bearing Puller Set
OTC (7507) CV Joint Fork Removing Adapter
Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit
OTC (7494A) Rear Axle Bearing Service Set
OTC (7508) 17-1/2" Slide Hammer Extension
OTC (7703) 10 Lb. Slide Hammer Puller
OEMTOOLS 27058 Front Wheel Drive Axle Pulley Attachment
OTC 7249 Ball Joint, U-Joint and Brake Anchor Pin Service Kit


OTC 7703 10 Lb. Slide Hammer Puller

Internal and external jaws provide a variety of combinations to pull bearings gears and seals. 24 inches long. Heat treated. This tool pulls c. V. The otc 7703 gets tough with those really stuck parts. Joints on 1986-current Taurus/Sable. This heavy-duty slide hammer puller gets tough with those really stuck parts.

. Weight 2 pounds 7 ounces. Heat treated, 24" long and a 5/8"-18 threaded end to adapt to any of OTC's pulling attachments. This hammer gives you the extra muscle for really stubborn pulling jobs. This hammer gives you the extra muscle for really stubborn pulling jobs. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.

It will also pull other joints having hidden retaining rings. Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. 5/8 inch-18 threaded end to adapt to any of OTC's pulling attachments. Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.

Pulls flange-type rear axles and most front-wheel drive hubs. 17-1/2 inch long slide hammer extension.


Similar products

OTC (7508) 17-1/2" Slide Hammer Extension
OTC (7507) CV Joint Fork Removing Adapter
OTC 4579 9-Way Slide Hammer Puller Set
OTC (7494A) Rear Axle Bearing Service Set
OTC 7208A Front Hub Installer and Puller
Neiko 20721A Pneumatic Rear Axle Bearing Puller Service Kit | Includes Case | 3-Piece Set
OEMTOOLS 27058 Front Wheel Drive Axle Pulley Attachment
OTC 6627 Grip Wrench Adapter
OTC 7372 Rear Axle Pulling Plate
OTC 4507 Bearing Race and Seal Driver Set - 10 Piece


OTC 7509 Inner CV Joint Puller

This hammer gives you the extra muscle for really stubborn pulling jobs. Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs. Pulls flange-type rear axles and most front-wheel drive hubs.

Weight 2 pounds 7 ounces. It will also pull other joints having hidden retaining rings. This tool pulls c. V. Also, it pulls other joints having hidden retaining rings. Tool is available with fork only, C. V. This is handy to have and easy to use. Joints on 1986-current Taurus/Sable. 5/8 inch-18 threaded end to adapt to any of OTC's pulling attachments.

Heat treated. 24 inches long. Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments. 17-1/2 inch long slide hammer extension. It pulls cv joints on 1986-current Taurus/Sable.


Similar products

OTC (7508) 17-1/2" Slide Hammer Extension
OTC (7507) CV Joint Fork Removing Adapter
Steck 71415 Axle Popper II
Qbace 2pcs Auto Cv Joint Boot Clamps Pliers Car Banding Tools Kit Set
OTC (7661) Caliper Hanger Set
OEMTOOLS 27037 3.75/4.5 Axle Puller
BETOOLL 5pcs Front End Service Tool Set Separate Pitman Arm Tie Rod End Puller Ball Joint
GearWrench 3916D Universal Ball Joint Separator
OTC 4579 9-Way Slide Hammer Puller Set
Lisle 41500 Fork Kit


OTC 7661 Caliper Hanger Set

Any time there's brake, wheel bearing, or suspension service to do, and at the same time, these hangers hold the brake calipers out of the way, axle shaft, reduce possible damage to the brake hose.5/8 inch-18 threaded end to adapt to any of OTC's pulling attachments. Weight 2 pounds 7 ounces. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.

The otc 7661 will pay for itself, in convenience alone. This tool pulls c. V. This heavy-duty slide hammer puller gets tough with those really stuck parts. 17-1/2 inch long slide hammer extension. Useful any time there's brake, axle shaft, wheel bearing, or suspension service to do. These hangers hold the brake calipers out of the way.

This hammer gives you the extra muscle for really stubborn pulling jobs. Internal and external jaws provide a variety of combinations to pull bearings gears and seals. Tool is available with fork only, C. V. Joints on 1986-current Taurus/Sable.


Similar products

Lisle 22800 Wheel Stud Installer
Lisle 24300 Speedy Brake Pad Spreader
OTC 4460 2-Piece Electrical Connector Separator Tool
Lang Tools 279 Brake Caliper Press
OTC 6007 Lower Control Arm Prying Tool
OTC 4521 Hose Removal Tool
Lisle 25750 Dual Piston Brake Caliper Compressor
OTC 4559 Manual/Pneumatic Pickle Fork Set
OTC 6295 Front End Service Set
Lisle 29100 Quick Quad Pad Spreader


OEMTOOLS 27058 Front Wheel Drive Axle Pulley Attachment

Use with oem 27033 slide hammer or any manufacturer’s slide hammer with 5/8” x 18 threads. 5/8 inch-18 threaded end to adapt to any of OTC's pulling attachments. Use with oemtools 27033 Slide Hammer. Tool is available with fork only, C. V. Joints on 1986-current Taurus/Sable. Heat treated. This heavy-duty slide hammer puller gets tough with those really stuck parts.

Useful any time there's brake, wheel bearing, axle shaft, or suspension service to do. These hangers hold the brake calipers out of the way. Joint slide hammer assembly or just the slide hammer extension. This tool pulls c. V. Weight 2 pounds 7 ounces. They also help reduce possible damage to the brake hose. Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.

Heat-treated for Strength. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs. 1/2 in drive chamfered square drive. The oem fwd axle pulley adapter is designed to pull inner CV joints with hidden retaining rings from front wheel drive vehicles without damaging joints.




Similar products

OTC (7508) 17-1/2" Slide Hammer Extension
OTC 4579 9-Way Slide Hammer Puller Set
OTC (7703) 10 Lb. Slide Hammer Puller
OEMTOOLS 27305 Axle Popper Kit (Fork and Shim)
Neiko 02236A Automotive Slide Hammer Puller Set | Steel T-handle | Chrome Vanadium Steel Attachments | 17-Piece Set
OTC (7507) CV Joint Fork Removing Adapter
GearWrench 41700D 10 Way Slide Hammer Puller Set
Cartman Slide Hammer Puller Set
Steck 71415 Axle Popper II
OEMTOOLS 27037 3.75/4.5 Axle Puller


Lisle 64970 Parasitic Drain Tester  

With this puller, the axle assembly is popped out of the transaxle without damage, thanks to the straight, even pull provided by the slide hammer. This tool pulls constant velocity joints on 1986-current Taurus/Sable. Provides an easy method to connect a Multimeter to the Vehicle Electrical System to Diagnose Hidden Battery Drain.

Replaceable in-line fuses protect both the meter and tester in the event a high current source on the vehicle is left on. Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. It will also pull other joints having hidden retaining rings. The tester and meter can remain connected until other computer systems shut down, isolating the drain.

24 inches long. 5/8 inch-18 threaded end to adapt to any of OTC's pulling attachments. Black oxide Finish to Resist Rust. Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs. This tool pulls c. V. Joints on 1986-current Taurus/Sable. The multimeter is bypassed with the switch during connection in case of a power surge.




Similar products

SG Tool Aid 23500 Back Probe Kit
GTC CT6100 Fuse Socket Connector Kit
FOXWELL BT705 12V&24V 100-2000 CCA Automotive Car Battery Load Tester, Cranking and Charging System Test Scan Tool Digital Battery Analyzer for Cars and Heavy Duty Trucks
Lang Tools (1129) Retractable Test Lead
Lisle 46950 Relay Puller Pliers
ESI 301M Fuse Buddy Mini DMM Adapter
ESI 303B Fuse Buddy ATC DMM Adapter
OTC 4460 2-Piece Electrical Connector Separator Tool
ESI 307M Fuse Buddy Mini Current Loop
Lisle 63900 Window Holder


Steck 71415 Axle Popper II

They also help reduce possible damage to the brake hose. Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments. Internal and external jaws provide a variety of combinations to pull bearings gears and seals. Tapered on both ends of the wedge along with a 6" shaft to fit into your air hammer.

Joint slide hammer assembly or just the slide hammer extension. Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. Black oxide Finish to Resist Rust. This hammer gives you the extra muscle for really stubborn pulling jobs. 1/2 in drive chamfered square drive.

24 inches long. As a convenience, stacking banana connectors are used on the tester. Use with oemtools 27033 Slide Hammer. The tester and meter can remain connected until other computer systems shut down, isolating the drain. 5/8 inch-18 threaded end to adapt to any of OTC's pulling attachments. Replaceable in-line fuses protect both the meter and tester in the event a high current source on the vehicle is left on.

Joints on 1986-current Taurus/Sable. 17-1/2 inch long slide hammer extension.


Similar products

OTC (7508) 17-1/2" Slide Hammer Extension
OTC (7509) Inner CV Joint Puller
OEMTOOLS 27058 Front Wheel Drive Axle Pulley Attachment
OTC (7507) CV Joint Fork Removing Adapter
OTC 4579 9-Way Slide Hammer Puller Set
Lisle 22800 Wheel Stud Installer
OTC Tools 5610 Trans-Eng Oil Press Tester
Form-A-Funnel Flexible Draining Tool, 9" Length x 4-3/4" Width x 0.094" Thick
Lisle 19342 Multi App Oil Funnel Set
Steck Manufacturing 71412 Axle Popper Shim Tool


OTC 6007 Lower Control Arm Prying Tool

Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. They also help reduce possible damage to the brake hose. 5/8 inch-18 threaded end to adapt to any of OTC's pulling attachments. Use with oemtools 27033 Slide Hammer. Installing a ball joint on a lower control arm typically requires the effort of two people.

Tapered on both ends of the wedge along with a 6" shaft to fit into your air hammer. Black oxide Finish to Resist Rust. With this tool and our 7420 or 7421 pry bar or any 7/8" diameter pry bar it's a one-person job. Safer than using a pry bar. It will also pull other joints having hidden retaining rings. The multimeter is bypassed with the switch during connection in case of a power surge.

Joints on 1986-current Taurus/Sable. Useful any time there's brake, axle shaft, wheel bearing, or suspension service to do. These hangers hold the brake calipers out of the way. This allows voltage to be measured on various locations on the vehicle during the drain test, using standard test leads. 7420 or 7421 pry bar - or any 7/8" diameter pry bar - it's a one-person job.




Similar products

OTC (7661) Caliper Hanger Set
Brake Caliper Hooks / Brake Caliper Hangers (Set of 2) - Made in the USA - Excellent Brake Tool For Brake Calipers
-Stainless Steel- Brake Caliper Hanger Hook (2 Piece Set) -MADE IN THE USA-
Lisle 38350 Exhaust Removal Pliers
Lisle 22800 Wheel Stud Installer
Lisle 64970 Parasitic Drain Tester  
Lisle 40750 Parking Brake Cable Remover
Lisle 59370 Stretch Belt Remover/Installer
Lisle 77080 19 mm Harmonic Balancer Socket for Honda
Lisle 63900 Window Holder


OTC Tools 5610 Trans-Eng Oil Press Tester

This hammer gives you the extra muscle for really stubborn pulling jobs. Useful any time there's brake, axle shaft, wheel bearing, or suspension service to do. These hangers hold the brake calipers out of the way. The tester and meter can remain connected until other computer systems shut down, isolating the drain.

Both gauges include rear hook to allow gauge to be hung conveniently out of the way. This allows voltage to be measured on various locations on the vehicle during the drain test, using standard test leads. Installing a ball joint on a lower control arm typically requires the effort of two people. Safer than using a pry bar.

With this tool and our 7420 or 7421 pry bar or any 7/8" diameter pry bar it's a one-person job. Large 3-1/2 inch gauges feature a chrome bezel and rugged protective outer boot. Replaceable in-line fuses protect both the meter and tester in the event a high current source on the vehicle is left on. Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.

Joints on 1986-current Taurus/Sable. They also help reduce possible damage to the brake hose. Low pressure gauge reads 0-100 psi and 0-700 kPa.


Similar products

OTC 5613 Vacuum/Pressure Gauge Kit
OTC 5609 Cylinder Leakage Tester Kit
OTC 5605 Deluxe Compression Tester Kit
Equus 9848 Oil Pressure and Electronic Temperature Metric Adapter Kit
OTC Tools 7219 Oil Pressure Adapter
OTC 4480 Stinger Basic Fuel Injection Service Kit
OTC 5630 Fuel Pressure Test Kit
OTC (3054E) Noid Lite/IAC Test Kit
Tool Aid 36350 In-Line Spark Checker Kit
SG Tool Aid 23500 Back Probe Kit