Pearce Grips PG-MPS Grip Extension for S&W M&P Shield

These units replace the magazine base plate. Enhances control and comfort without sacrificing conceal ability. Blends with the contours and texture of the handgun and have a factory appearance. They are made from high impact Polymer and withstand drop tests at temperatures from -20 F to 350 F. They do not alter the capacity of the magazine and provide better comfort by adding approximately 3/4 inch of gripping surface.

The pearce pg-mps provides control and comfort without sacrificing conceal ability. It blends with the contours and texture of the handgun to maintain a factory appearance. Fits s&w m&p shield both9mm and. 40 cal. Forms the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability.

Made from high impact polymer and withstands drop tests at temperatures from -20 F to 350 F.

---

TALON Grips 705R for Smith and Wesson M&P Shield 9mm/.40, Black Rubber

Talon grips are a uS patented single piece wrap around adhesive grip. Create a functional and positive interface between the operator and the firearm. Only 05mm in thickness they create no perceptible increase in grip thickness. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage including the thumb rest area, full coverage under the trigger guard, and full coverage on the backstrap.

Available in rubber or granulate texture. Easy to install within minutes. Talon grips for smith & Wesson M&P Shield models. This grip has graphic cutouts for the M&P emblem on both sides of the firearm. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish.


Similar products

---

TALON Grips for S&W M&P Shield "Pearse Mag Extension" ONLY 9mm/.40, Black Rubber

Talon grips for the smith & wesson M&P Shield Pearce Grip Extension PG-MPS. Available in rubber or granulate texture. Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP. Low profile grip adds minimal bulk/size. 100% made in the USA. Talon grips are a uS patented single piece wrap around adhesive grip.

Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. This grip is available in rubber texture. Only 05mm in thickness they create no perceptible increase in grip thickness. Easy to install within minutes. Create a functional and positive interface between the operator and the firearm.

. Used by many of the top competitive shooters. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. The polymer pearce grip model PG-MPS is not included with this grip purchase.


Similar products

---

TALON Grips for Springfield XD-S 9mm/.45 3.3-Inch barrel, Small Backstrap, Granulate

100% made in the USA. Used by many of the top competitive shooters. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Easy to install within minutes. Available in rubber or granulate texture. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish.

Talon grips are a uS patented single piece wrap around adhesive grip. Available in rubber or granulate texture. Create a functional and positive interface between the operator and the firearm. There are cutouts on the grip around the XD-S logo which also maintain the look of the factory stippling. Talon grips for springfield XD-S 9mm,.

40 and. 45 acp single stack models with the 3. 3" and 4. 0" barrel. Only 05mm in thickness they create no perceptible increase in grip thickness. Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP. Low profile grip adds minimal bulk/size.


Similar products

---

MAKERSHOT Custom 9mm Caliber Magazine Speedloader Smith & Wesson M&P Shield

Talon grips are a uS patented single piece wrap around adhesive grip. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP. Low profile grip adds minimal bulk/size. May be used with thumb from top or with thumb and pointer finger along rim.

Available in rubber or granulate texture. Makershot speed loaders are fine-tuned across more than two-dozen critical dimensions for a specific magazine, comfort, speed, resulting in perfect fit, and durability. Talon grips are a uS patented single piece wrap around adhesive grip. Easy to install within minutes.

Used by many of the top competitive shooters. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. This complex technology, developed in the USA, creates high-quality loaders that are simply the fastest and easiest to use. Create a functional and positive interface between the operator and the firearm.

Clone magazines are likely to work. Magazine NOT included. Perfect fit on selected magazine for ideal loading of every round.


Similar products

---

Pearce Grips PG-G4MF Frame Insert for Mid and Full Size Glock Gen 4 Frames NOT for 10mm or .45ACP

Fits glock models 17, 19, 34, 18, 24, 37, 22, 35, 21, 20, 23, 31, 32, and 38. Used by many of the top competitive shooters. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Made in the USA. Available in rubber or granulate texture. Talon grips are a uS patented single piece wrap around adhesive grip.

Easy to install within minutes. Create a functional and positive interface between the operator and the firearm. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Available in rubber or granulate texture.

This product will only fit new Generation 4 frames. Only 05mm in thickness they create no perceptible increase in grip thickness. Helps keep debris out of the magazine well. Allows for use of factory interchangeable backstraps Talon grips are a uS patented single piece wrap around adhesive grip. Friction fit holds the unit in place in the bottom rear cavity of the frame.

Perfect fit on selected magazine for ideal loading of every round.


Similar products

---

Made in USA - Inside Waistband Concealed Carry Holster Black Right Hand - S&W M&P Shield 9/40 IWB Holster Veteran Owned Company - Made from Boltaron

Friction fit holds the unit in place in the bottom rear cavity of the frame. Perfect fit on selected magazine for ideal loading of every round. High-quality polymer speed loader from an American company. Great speed, ergonomics and lifetime durability. Easy load assist will prevent sore fingers at the range. Fits gen 4 only models 17, 32, 31, 19, 34, 35, 18, 23, 37, 22, 24, and 38.

Allows you to use factory interchangeable backstraps. Thank you for supporting American made small busienss. Create a functional and positive interface between the operator and the firearm. Cya supply Co. Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP. Low profile grip adds minimal bulk/size.

Please select caliber and MAGAZINE compatibility above. This is not a universal loader. Available in rubber or granulate texture. By recessing this area we are able to create a smoother draw and re-holster. Please check hand orientation!! this holster fits the M&P Shield 9mm or 40 cal. Only 0


Similar products

---

Talon Grip for Pearce Mag Extender Grip, fits Springfield XD-S, Rubber

This is the talon grip wrap only for the Pearce extender. Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP. Low profile grip adds minimal bulk/size. This is not a universal loader. Only 05mm in thickness they create no perceptible increase in grip thickness. Easy to install within minutes.

Superior materials: we use boltaron for Our Holsters, This Means Higher Impact and Temperature Resistance. Less friction: reliefs have been made for the Safety, Slide Release Etc Which Means Better Draw, Re-holster and Less Wear. Adjustable cant: some folks like to carry at 0 Degrees, Others like 15, Our Holster's Cant Is Fully Adjustable.

Talon grips are a uS patented single piece wrap around adhesive grip. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. The plastic pearce grip models PG-XDS, PG-Nano are NOT included with this grip purchase. Used by military, Law Enforcement and Competitive Shooters.

Used by many of the top competitive shooters. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Create a functional and positive interface between the operator and the firearm.


Similar products

---

Talon Grip for Smith & Wesson M&P Shield Black Rubber - 705R W/ TWO Ext Mag Grips 737

Create a functional and positive interface between the operator and the firearm. Used by many of the top competitive shooters. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Talon grips for smith & Wesson M&P Shield 9mm and. 40 model. Made in the USA. Helps keep debris out of the magazine well.

Only. 7mm in thickness they create no perceptible increase in grip thickness. Made in usa, chock Full of Quality. Only 05mm in thickness they create no perceptible increase in grip thickness. Talon grips are a uS patented single piece wrap around adhesive grip. Superior materials: we use boltaron for Our Holsters, This Means Higher Impact and Temperature Resistance.

Less friction: reliefs have been made for the Safety, Slide Release Etc Which Means Better Draw, Re-holster and Less Wear. Adjustable cant: some folks like to carry at 0 Degrees, Others like 15, Our Holster's Cant Is Fully Adjustable. Talon grips are a uS patented single piece wrap around adhesive grip. Easy to install within minutes.

Talon grips are a uS patented single piece wrap around adhesive grip.


Similar products

---

Pachmayr Tactical Grip Glove for S&W M&P Shield, Ruger SR22, Walther PPS, Taurus PT740, PT709

Create a functional and positive interface between the operator and the firearm. This is not a universal loader. Soft pachmayr Decelerator rubber with ventilated side panels. The custom fit feels like an extension of your handgun grip. Please select caliber and MAGAZINE compatibility above. Ideal for polymer or steel framed handguns.

Made in usa, chock Full of Quality. 100% made in the USA. Easy to install within minutes. Used by many of the top competitive shooters. Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Grip gloves are custom molded for each pistol model. The ultra-soft, ultra-stretchy material makes installation a snap.

Create a functional and positive interface between the operator and the firearm. Stretch to fit for easy installation. Proudly distrubited by Johnson Enterprises, LLC. Made in the USA. Distinctive ventilated side panels and finger grooves provide more instinctive gun orientation and a professional look. Only 0




Similar products

---

Glock GT03374 Disassembly Takedown Tool Punch

Superior materials: we use boltaron for Our Holsters, This Means Higher Impact and Temperature Resistance. Less friction: reliefs have been made for the Safety, Slide Release Etc Which Means Better Draw, Re-holster and Less Wear. Adjustable cant: some folks like to carry at 0 Degrees, Others like 15, Our Holster's Cant Is Fully Adjustable.

Talon grips are a uS patented single piece wrap around adhesive grip. Easy to install within minutes. Talon grips are a uS patented single piece wrap around adhesive grip. Glock Disassembly Tool. Soft pachmayr Decelerator rubber with ventilated side panels. Only. 7mm in thickness they create no perceptible increase in grip thickness.

Create a functional and positive interface between the operator and the firearm. This is not a universal loader. Proudly distrubited by Johnson Enterprises, LLC. Only 05mm in thickness they create no perceptible increase in grip thickness. Fits s&w m&p shield, ruger sr22, walther pps, Taurus PT740, PT709.


Similar products