TEMCo 1/4″ Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Diameter: 1/4". The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals.

TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Color: red, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. Lifetime warranty. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.

Adhesive reflow will occur at temperatures above 80 deg C 176 deg F.

More information about TEMCo #ad

TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.

Lifetime warranty. Diameter: 1/4". Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Color: black, material: Polyethylene, Shrink Ratio: 3:1. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Upon cooling, non-drying, the adhesive solidifies, forming a permanent, flexible and water resistant barrier.

Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

More information about TEMCo #ad


Similar products



TEMCo 3/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Diameter: 1/4". Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.

Diameter: 3/8". Color: red, material: Polyethylene, Shrink Ratio: 3:1. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

TEMCo 3/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Lifetime warranty. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Lifetime warranty. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction.

When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals.

More information about TEMCo #ad


Similar products



TEMCo 1/2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Diameter: 1/4". The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1/2". Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

TEMCo 1/2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Color: red, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.

Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Upon cooling, non-drying, the adhesive solidifies, forming a permanent, flexible and water resistant barrier.

More information about TEMCo #ad


Similar products



TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: red, material: Polyethylene, Shrink Ratio: 3:1.

Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more. Diameter: 3/8". Lifetime warranty. Lifetime warranty. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Diameter: 1".

TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Color: black, material: Polyethylene, Shrink Ratio: 3:1. Lifetime warranty.

More information about TEMCo #ad


Similar products



TEMCo 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 1/2". Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.

Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: black, material: Polyethylene, Shrink Ratio: 3:1. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals.

TEMCo 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 3/16". The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Diameter: 1/4". Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more.

Diameter: 3/8".

More information about TEMCo #ad


Similar products



TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Color: black, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Lifetime warranty. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Lifetime warranty. Lifetime warranty. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Lifetime warranty.

More information about TEMCo #ad


Similar products



TEMCo 1/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1". When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 3/16". Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

TEMCo 1/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Upon cooling, forming a permanent, the adhesive solidifies, non-drying, flexible and water resistant barrier. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more.

Diameter: 1/2". Lifetime warranty. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

More information about TEMCo #ad


Similar products



TEMCo 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

. Lifetime warranty. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Color: red, material: Polyethylene, Shrink Ratio: 3:1.

TEMCo 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1". Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 1/2". Lifetime warranty.

More information about TEMCo #ad


Similar products



TEMCo 9/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Diameter: 3/16". Color: black, material: Polyethylene, Shrink Ratio: 3:1. Lifetime warranty. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1". Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more.

Diameter: 3/8". Lifetime warranty. Lifetime warranty. Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

TEMCo 9/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 1/2".

More information about TEMCo #ad


Similar products



TEMCo 1/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Diameter: 1/4". Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: red, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.

Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: red, material: Polyethylene, Shrink Ratio: 3:1.

TEMCo 1/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more.

Diameter: 1". When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

More information about TEMCo #ad


Similar products