Yost MAV-3.5 Multi-Angle Vise, 3.5″

The yost mav-3 is a 3” Multi-Angle Bench Vise. 4-3/4-inch Capacity. The mav-3 is able to clamp in both upright and horizontal positions. This unique vise swivels a full 360-degrees and then locks in place, at any angle, when the jaw is tightened. The precision casting process along with accurate machining this vise a joy to work with.

This vise is designed with luthiers, woodcarvers and gunsmiths in mind. 18 pounds. 360-degree Swivel. Precision casting for Durability and Smooth Operation. 3-1/2-by-2-1/8-inch Jaws.

---

Lisle 48100 Vice Jaw Pad

Strong nitrile magnets attach to any steel vise jaw. Also works great for holding irregular shapes. Rubber jaw pads protect delicate parts from damage. Strong nitrile magnets attach to any steel vise jaw. Also works great for holding irregular shapes. Rubber jaw pads protect delicate parts from damage.


Similar products

---

Bessey BV-NVJ Multi-Purpose Vise Jaws Jaws Only

Ideal for holding wood, metal and tubing. Magnetic backing means no screws necessary. Strong nitrile magnets attach to any steel vise jaw. Also works great for holding irregular shapes. Soft surface prevents marring of more delicate surfaces. Bessey nylon vise jaws are designed to fit most 3" to 6" vise jaw. Designed to avoid marring of already machined surfaces, soft metals and wood.

The magnetic back keeps them in place. Adapts to vise jaws from 3-6 In wide. Rubber jaw pads protect delicate parts from damage.


Similar products

---

Reversible to Clamp Flat or Round Products - Magnetic - Use on Any Metal Vise - Nylon Multipurpose Vise Jaws - Choose 4"or 6"- 2 sets in 1.

Protect your working piece Flat or Round from the Metal on your Vise. They will not discolour or leave any marks on your Working piece, with 8 strong rear earth magnets per set, they will stay put on your metal vise. Adapts to vise jaws from 3-6 In wide. Magnetic backing means no screws necessary. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press.

The unique multipurpose design allows you to TURN them OVER for use on the Flat or Grooved side. Soft surface prevents marring of more delicate surfaces. Kiu products are backed by a Full 100% Replacement or Money Back Guarantee. 4" vise jaws that work on any Metal Vise. Also works great for holding irregular shapes.

The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE. One side flat, v-pads, protector for Barrels, Prismatic, woodwork, one side multi-groove, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Designed to avoid marring of already machined surfaces, soft metals and wood.

Australian made from recycled nylon that keeps the Environment in Mind Certification complies with requirements of relevant USA standards. We pride ourselves in research and test our products to provide a quality Tool from the best available materials.


Similar products

---

Shop Fox D3126 Tilting Jaws for D3125 Parrot Vise

The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE. One side flat, one side multi-groove, v-pads, protector for Barrels, woodwork, Prismatic, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Also works great for holding irregular shapes.

Solid construction. Designed to avoid marring of already machined surfaces, soft metals and wood. Long lasting. These tilting jaws pivot to hold non-parallel edged items with even pressure. Magnetic backing means no screws necessary. Rubber jaw pads protect delicate parts from damage. D3125 parrot vise. Designed to fit Model D3125 Parrot Vise.

Soft surface prevents marring of more delicate surfaces. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. Strong nitrile magnets attach to any steel vise jaw. Adapts to vise jaws from 3-6 In wide. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press.




Similar products

---

Ideal for M1911 and M1911-Style Pistols, 10/22s, etc. - Universal Bench Block

Warning: always make sure firearms are unloaded before attempting disassembly or reassembly. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. Provides the same quality as Wheeler Engineering's / Battendfeld Technologies' universal bench block at a more affordable price.

Molded from high-quality, durable polyurethane to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. D3125 parrot vise. Rubber jaw pads protect delicate parts from damage. Notches, grooves and holes on both sides are designed to simplify a variety of tasks. Long lasting. Adapts to vise jaws from 3-6 In wide.

Molded from high-quality, durable polyurethane to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. Soft surface prevents marring of more delicate surfaces. Inspect the chamber and magazine to be sure there is no ammunition in the firearm. Highly useful for drifting and staking assembly pins, barrel link pin removal, main spring removal, dressing the ejector port, dressing the slide rails, removing hammer and sear pins, staking the front sight, drifting the rear sight and more.

Provides the same quality as Wheeler Engineering's / Battendfeld Technologies' universal bench block at a more affordable price. The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE.


Similar products

---

Yost MU-360 Universal Jaw Cover, 6"

They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. Magnetic backing means no screws necessary. This design more effectively grips products than traditional horizontal grooves or standard smooth jaws. These universal jaws feature three high strength magnets unlike other jaws that only feature two.

Ideally suited for m1911s and m1911-style pistols as well as other firearms 10/22s, etc. Notches, grooves and holes on both sides are designed to simplify a variety of tasks. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press. Multi-purpose vise jaws. The distance from the edges of the magnets is 3-3/4”, allowing them to be used on a 4" vise up to a 6" vise.

Solid construction. Rubber jaw pads protect delicate parts from damage. Strong nitrile magnets attach to any steel vise jaw. Highly useful for drifting and staking assembly pins, dressing the slide rails, removing hammer and sear pins, dressing the ejector port, main spring removal, barrel link pin removal, staking the front sight, drifting the rear sight and more.

Provides the same quality as Wheeler Engineering's / Battendfeld Technologies' universal bench block at a more affordable price. Yost mu-360 plastic jaws are designed to fit most 4" to 6" vise jaw.


Similar products

---

TEKTON Gunsmith Punch Set, 18-Piece | 66564

Molded from high-quality, durable polyurethane to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE. One side flat, woodwork, Prismatic, v-pads, one side multi-groove, protector for Barrels, mechanics.

Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Service and repair guns without damaging pins or marring surfaces with the TEKTON 18-pc. Magnetic back. Solid punches are stout and powerful to loosen rusted or frozen pins and drive out rivets. With a sharp pointed tip, the Center Punch creates a clear guide mark for drilling.

Each punch has a straight and true tip that's precisely machined to meet exacting size tolerances, so you're less likely to slip and scratch delicate finishes. Center punch has a sharp point that marks cast iron, brass, aluminum, mild steel, and wood with a dimpled starting spot for drilling. All punches have a classic natural finish with a dry-touch, rust-preventative coating.

They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. Simplifies the installation of pins, detents and springs. Designed to fit any 4-6 in.


Similar products

---

TRISENSE Magnetic Multi-Purpose Vise Jaw, 4" in Length, Fit Wide Array of Vices, 2 Pack

V-shaped aluminum surface holds and helps protect round or hex parts. 76-152mm vise jaw. Center punch has a sharp point that marks cast iron, mild steel, brass, aluminum, and wood with a dimpled starting spot for drilling. All punches have a classic natural finish with a dry-touch, rust-preventative coating.

Multi-purpose vise jaws. Aluminum 4" jaws will protect and hold any delicate product Flat or round on any metal Vise. They can be used on both faces of each jaw to Grip round tube or threaded part- or any flat material. The design makes them unique for gunsmith, workbench, hobby, toolmaker non-marring - AUSTRALIAN MADE.

One side flat, prismatic, one side multi-groove, protector for Barrels, v-pads, woodwork, mechanics. Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press. Magnetic back. Rubber jaw pads protect delicate parts from damage.

Magnetic backing means no screws necessary. Specially designed ledge, supports flat parts while clamping. Designed to avoid marring of already machined surfaces, soft metals and wood.


Similar products

---

6-Piece Set - Hook and Pick Set - HP6- Gunsmith Tools and Accessories - Grace Tools

Set is ideal for the discerning And Discriminating Gunsmith Who Demand Quality Tools. Designed to fit any 4-6 in. The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE. One side flat, protector for Barrels, v-pads, woodwork, one side multi-groove, Prismatic, mechanics.

Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. Made in the USA. V-shaped aluminum surface holds and helps protect round or hex parts. Guarantee:100% money back warranty if for any reason you are not satisfied. The grace usa hook & pick set - 6 pc. Magnetic backing means no screws necessary.

Aluminum 4" jaws will protect and hold any delicate product Flat or round on any metal Vise. They can be used on both faces of each jaw to Grip round tube or threaded part- or any flat material. Specially designed ledge, supports flat parts while clamping. Center punch has a sharp point that marks cast iron, mild steel, brass, aluminum, and wood with a dimpled starting spot for drilling.

All punches have a classic natural finish with a dry-touch, rust-preventative coating. Designed to avoid marring of already machined surfaces, soft metals and wood.


Similar products

---

WEN 4280 5 Amp 8" Variable Speed Bench Grinder with Work Light

Designed to fit any 4-6 in. Solid punches are stout and powerful to loosen rusted or frozen pins and drive out rivets. Solid construction. 5-amp variable speed motor goes anywhere from 2000 to 3400 RPM. Sturdy cast iron base with mounting holes prevents wobbling and walking. Also works great for holding irregular shapes.

Aluminum 4" jaws will protect and hold any delicate product Flat or round on any metal Vise. They can be used on both faces of each jaw to Grip round tube or threaded part- or any flat material. Our package includes two 8-inch by 1-inch wheels: an 80-grit wheel for material removal and general purpose grinding and a coarse 36-grit wheel for faster material removal.

Change the variable speed anywhere from 2000 to 3400 RPM with the simple turn of a knob. D3125 parrot vise. Set is a finely crafted Set Of Tools Made In The Great American Tradition. Set includes: 1/8" small scribe, 30 degree bent pick, double Bend Pick, 90 degree bent pick, 180 Degree Loop Pick, 180 Degree Hook Pick.

Made with usa chromium-vanadium 8650 alloy steel Blades, Black Oxide Blades, Nickel Plated Steel Ferrules Made In The Usa. Molded from high-quality, durable polyurethane to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. Pin and roll pin punches smoothly drive out or insert solid pins, hollow pins, and springs and are reverse tapered so they won't stick in work pieces.




Similar products